Gumus, G.Sarioglu, B.Daghan Gokdel, Y.2024-07-182024-07-1820169786050107371https://doi.org/10.1109/ELECO.2015.7394495https://hdl.handle.net/11411/63959th International Conference on Electrical and Electronics Engineering, ELECO 2015 -- 26 November 2015 through 28 November 2015 -- -- 119202This paper presents an electronic system that controls the entire operation of a laser scanning microscopy system through a DAQ card. Proposed system does not only create the required electro-coil driving signal peculiar to magnetically actuated micro-scanner that enables the raster-scanning movement, but also is responsible from the image acquisition part by both serially gathering the laser intensity data and using it to construct a meaningful microscopy image. Micro-scanner which is fabricated using Ni as the structural material is utilized in the system. The micro-scanner's slow and fast scan frequencies are measured to be 250 Hz and 1560 Hz, respectively. Model of the DAQ card used in the system is NI-6356 which has maximum 5 mA current and 10 V voltage outputs. A power amplifier circuit with LM 386 is designed and added to the system for increasing field-of-view of the micro-scanner. The operation of the proposed system is demonstrated by acquiring data and constructing images from the USAF resolution target. © 2015 Chamber of Electrical Engineers of Turkey.eninfo:eu-repo/semantics/closedAccessLaser ApplicationsLaser OpticsPower AmplifiersScanningSurface AnalysisAmplifier CircuitsElectronic ControlsElectronic SystemsImage Acquisition SystemsLaser İntensitiesLaser Scanning MicroscopyMicroscopy İmagesRaster ScanningImage AcquisitionConference Object2-s2.0-8496381202210.1109/ELECO.2015.7394495161N/A158